WAVLINK N300 Outdoor WiFi Extender, Outdoor CPE for PtP and PtMP Transmission | 11dBi Directional Antennas, 1.5km, PoE Powered | Support Access Point/Router/Repeater Modes, Ideal for Barn Garage Yard

Installation Instruction

• Installation Height:

Keep the height of the flat antenna 2-3 meters above the ground without obstruction, and 1-2 meters horizontal drop from the network terminal (mobile phone, surveillance camera).

• Installation Direction:

The signal facing the front of the panel antenna is much stronger, please pay attention to whether the front and back of the antenna panel are facing correctly when installing.

• Installation Steps:

Support flexible deployment on the wall or on the round pole. For detailed steps, please refer to our step-by-step diagrams in this page or installation instructions in the package.

If the login page does not appear, please check:

1. Make sure your wirelessly connected computer is connected to the SSID. or If your computer is connected via an Ethernet cable, please verify that the connection is stable.

2. Make sure your computer is set to automatically obtain an IP address.

3. Use that IP address to log in to the page. The default IP is 192.168.10.1. If the device is connected to the host WiFi, please go to the router’s DHCP client list to get the current IP address of the device.

4. Please reset the device and try again. If the problem still exists, please feel free to let us know.